Metaset® 200V
A medium strength anti-slump mortar for use on vertical substrates. It can be applied up to 15mm thick per coat on steeply inclined or vertical substrates.
Metaset® 300 & 300 Industry
High strength, multipurpose mortars used for the repair of damaged or deeply textured horizontal surfaces. It can also be used for the patching, infilling and joining of concrete beams, or overlaying concrete for protection against chemical attack, impact and wear etc. Metaset ® 300 Industry can be extended with coarse aggregates for use at depths over 10mm.
Metaset® 500
Ultra high strength mortar for horizontal or slightly inclined surfaces subject to heavy loading. It is generally used for the rapid repair of bridge piers, bedding bridge-bearings, mounting heavy plant or machinery and bedding concrete kerbs to concrete. |
|
Areas of Application
The Metaset® range can be used in most situations where the minimum delay and disruption is of the utmost importance including areas such as:
 Concrete Roads & Ramps
Bridge and Car Park Decks
Driveways & Pavements
Loading Bays & Warehouse Floors
Airport Runways & Aprons
Floor Maintenance
Cold Stores
Benefits of Metaset®
Rapid cure : 1 to 2 hrs across a
 wide temperature range : grades for
curing between -20 and 40°C.
Accepts loading after 2-4 hours.
UV, aging & weather resistant.
High impact / shock resistance.
Compressive strength comparable to
concrete, with greater tensile and
flexural strength.
Resistant to most acids and alkalis up
to 25% concentration.
Impervious to water, brine, grease,
oil, and cleaning solutions. |
